Wireless Environment Analysis
Model WSTY-H1
Introduction
WSTY-H1 is portable full - frequency, full - standard, real - time digital wireless signal detection and analysis equipment.
It is independently developed in China, and comprehensively optimizes the wireless communication modes and protocols of the three major domestic operators as well as other power frequency and communication protocols, so as to realize the positioning and prevention of wireless signal equipment with high precision and accuracy.
Function
WSTY-H1 truly realizes the demodulation of the wireless signal captured in real-time space transmission, and then digitizes the IQ component.
In this way, deep time domain/frequency domain analysis can be performed on the digital signal of unresolved protocol without obtaining the user's privacy. To see if there is a wireless transmission. And the general characteristics of the wireless signal - such as whether it is audio and video, whether it is big data, etc.
While other products on the market are only simple wireless signal analog detection, so it can not effectively determine the various details of its signal.
WSTY - H1 truly according to the international and domestic radio communication standard, strictly distinguish between frequency range, each kind of communication system and its corresponding frequency range and the channel number clearly, according to different communication format, only to detect corresponding uplink channel, and adopt different algorithms to realize only capture signals from wireless devices, the received signal analysis. Accurate judgment, no interference.
However, other products on the market simply divide 900M, 1800M and 2400M frequency bands, unable to accurately distinguish different modes, different protocols, and unable to distinguish upstream and downstream signals.
As a result, all signals transmitted in space have been detected unnecessarily, which artificially increases the difficulty of interference and judgment.
Function
WSTY-H1 truly realizes real-time signal detection while recording the state of the wireless signal in a long time, and uses its own deep learning algorithm to analyze all data and effectively distinguish the normal signal from the danger signal.
Other products on the market, only real-time display state, can not save the signal has occurred and analysis, at the same time can not be saved and exported.
Once again, WSTY-H1 device does not have the function of parsing protocol, so it cannot analyze the content of wireless communication data, which effectively guarantees the privacy of users.
| 1 |
Up arrow |
2 |
Left arrow |
| 3 |
Down arrow |
4 |
Right arrow |
| 5 |
Returning key |
6 |
Set key & Sensitivity |
| 7 |
Power On/Off |
8 |
Charging port |
| 9 |
Screen |
10 |
Antenna |
Function & Features
•Can do Wi-Fi Positioning;
•Mobile phone positioning in the call;
•Can find Wi-Fi cameras;
•Can find GSM and 4G card eavesdroppers;
•Wi-Fi camera alarm;
It is easy to operate, small and portable, and flexible to use;
0-6GHz wireless spectrum detection, covering all the current international and domestic wireless communication frequency bands;
Full protocol support for 2G (GSM, CDMA), 3G (WCDMA, CDMA2000) and 4G (TDD, FDD) operators;
Wi-Fi protocol can distinguish hot spots, connected devices and unconnected devices, cover the whole channel, and effectively locate and check all kinds of Wi-Fi devices;
The scanning cycle is 500ms to ensure that all wireless signals are captured in real time;
The signal strength is divided into 12 segments to effectively confirm the signal strength and distance of the transmitting signal source;
The detection sensitivity is divided into four sections, ranging from 10 m to 20 cm.
Wide area detection, accurate positioning;
According to the user's use scenarios, a variety of work scenarios are developed innovatively to facilitate the user to use according to the specific situation;
According to the user's use scenarios, a variety of work scenarios are developed innovatively to facilitate the user to use according to the specific situation;
According to the time, type and intensity of the signal source, the deep learning algorithm is integrated and the alarm level is set: yellow and red to avoid false alarm;
All kinds of wireless signals are divided into four categories: voice, period, data and Wi-Fi. To ensure that the user can distinguish the signal status effectively;
4G signal can distinguish normal data, large data, audio and video data;
Alarm mode: vibration, silence, beep.
| Frequency range |
0~6G HZ |
| Antenna |
3dBi Omni-directional antenna |
| Detection range |
20cm~10M |
| Working time |
4~5 hours |
| Battery capacity |
High density lithium battery 3000mAh |
| Dimension |
117*66*19mm |
| Charging port |
Micro usb |
| Charging time |
4 hours |
| Display MODE |
2.4-inch IPS full view HD TFT screen |
| Processor |
Dual core 800Mhz |
| China Mobile GSM |
885M~909M; 1710M~1735M |
| China Unicom GSM |
909M~915M; 1740M~1755M |
| China Telecom CDMA |
825M~835M |
| China Unicom WCDMA |
1940M~1955M |
| China Mobile TDD-LTE |
1885M~1915M;2320M~2635M |
| China Unicom FDD-LTE |
1745M~1765M |
| China Telecom FDD-LTE |
1765M~1780M;1920M~1940M |
| WiFi |
2401M~2483M 13 channels |
){kind=link}